ETRUSIA
  1. Home
  2. Guides
  3. Fit, Form, Function audits

Guide · Quality on the shop floor

Fit, Form, Function: a random quality audit a window plant can run twice a day.

Final inspection sees a finished window. By then a frame cut a sixteenth long, a sealed unit with the Low-E on the wrong face or a screen with a loose spline has already been built into it. An FFF audit pulls a few windows at random while they are still frames, sashes, glass and screens, and asks three questions of each: does it fit, does it look right, does it work.

Published November 2026 by Extrusia

What Fit, Form and Function mean on a window line

Engineers use fit, form and function to decide whether a changed part is still the same part. On a window line the same three words sort every check a person can make by looking at or handling one window for a minute or two:

AspectThe questionExamples
FitIs it the size and shape the order says?Width and height within 1/16", corners square, sash sits evenly in the frame
FormDoes it look the way a customer expects?Clean welds, no scratches on the faces that show, sealant with no skips, mesh tight
FunctionWill it do its job?Weep slots clear, locks engage, Low-E on the right face, balances hold the sash

Sorting checks this way matters for one reason: an audit that only ever measures is blind to a scratched face, and one that only ever looks is blind to a window that is square, clean and will not lock.

Why audit in process, and why at random

A defect costs least at the bench that made it. A frame out of square found at the frame bench is one frame. The same frame found at assembly is a frame, the glass already glazed into it and the hour somebody spent building it.

The audit is random so that nobody builds for it, and small so that it actually happens. One window of each part, twice a day, is ten checks. A plant that sets out to inspect everything usually inspects nothing by Thursday.

What to check, part by part

These come from the starting list Extrusia gives a vinyl window plant. Every line is something one person can check at the bench without taking the window apart.

PartFitFormFunction
FrameWidth and height match the order; diagonals within 1/16"Welds clean, corners cleaned, no bow or twistWeep slots punched and clear; right profile and color
SashWidth and height match the cut list; corners squareWelds clean; no marks on the faces that showReinforcement in place; lock and keeper prep in the right place
GlassUnit size matches the order; thickness right for the makeupSpacer straight, sealant continuous, clean between the panesRight makeup; Low-E on the right face; tempered mark where tempered is ordered
ScreenWidth and height match the windowCorners tight, mesh tight, spline seated all the way roundRight frame color; pulls and springs fitted and working
Assembled windowReveals even; glazing bead seated; overall size matchesGlass clean; no marks inside or out; stickers onSash opens and closes; locks hold; weatherstrip continuous

Five rules that keep an audit honest

  • Pick a window that is still at that stage. A frame that has already been assembled cannot be checked as a frame, and a job that has left the building cannot be checked at all. The pick has to come from where the windows are now, which means from the scans, not from the order list.
  • Rotate the questions. The same four checks every day get ticked from memory. Keep a long list for each part, ask a few lines of it on each check, and ask the ones that have gone longest without being asked.
  • Give every line an OK box and a FAIL box. With one box, a line nobody looked at and a line that passed are the same blank. Two boxes make a skipped line visible.
  • A fail has to go somewhere. A failed check that stays on a clipboard changes nothing. It should become a remake of the part that failed, and the people who run production should hear about it the same day.
  • Say what did not happen. An audit that was never filled in is a missed audit, and a part with no window to pick is a short sheet. Both are facts worth seeing. A day the plant is shut is neither.

What a check looks like on the sheet

Each window on the report gets its own block: which window it is and where it was last scanned, then the lines to check.

#1 · Frame · Order 30612
Line 2 · window 1 of 4 · 36 x 60 · last read at Frame

AspectCheckOKFAIL
FitCorners square: diagonals within 1/16"☐☐
FormWelds clean: no voids, burn or open corners☐☐
FormNo bow or twist along any side☐☐
FunctionWeep slots punched, clear and on the right side☐☐

Illustrative. Your sheet prints your own checklist against windows on your own floor.

How Extrusia handles it

The FFF report is part of Extrusia ERP. The QC manager sets the times of day, how many windows of each part to check, and the checklist for each part.

  • It draws itself. At each set time, on days the plant works, Extrusia picks windows at random for each part from the ones scanned at that stage and not yet past it, on orders still in the building. A window checked in the last three days is not picked again. A report can also be drawn by hand at any time.
  • It prints itself. The sheet comes out of the QC printer with each window's order, serial, size and where it was last scanned, so the auditor can walk straight to it. Production gets a notice that it is ready.
  • The questions rotate. Each check prints a few lines from that part's list, the least recently asked first, mixed across fit, form and function.
  • The paper comes back as a scan. Scan the marked sheet and Josie reads the boxes. Her reading is a proposal: a box she cannot make out is flagged for a person, and nothing is recorded until somebody confirms it.
  • A confirmed fail raises the remake. The part that failed goes back to the bench that builds it, the same remake anyone can raise from a bench, and production is alerted with the window, the failed lines and the auditor's note.
  • Nothing is quietly skipped. A report still open after its day is shown as missed, and a part with nothing to pick is printed as short on the sheet.

Each sheet is read against the checklist it was printed with, so editing the list next month does not change what last month's audits say.

FFF audits — common questions

What does FFF stand for in quality control?

Fit, Form and Function. Fit asks whether the part is the size and shape the order calls for, form asks whether it looks right, and function asks whether it will do its job. Some plants say form, fit and function; the three questions are the same.

How is an FFF audit different from final inspection?

Final inspection looks at every finished window before it ships. An FFF audit looks at a few windows chosen at random while they are still frames, sashes, sealed units and screens, so a problem is found at the bench that made it and before more work is built on top of it. A plant needs both.

How many windows should an FFF audit check?

Few enough that it gets done every time. One window of each part, twice a day, is a common starting point. In Extrusia the QC manager sets the times of day and how many windows of each part a report picks, up to five of a part.

What happens when a check fails?

The failed part should be remade and the cause looked at while the cart is still on the floor. In Extrusia a confirmed fail raises a remake of the part that was checked, routed to the bench that builds it, and alerts production with the failed lines and the auditor's note. A failed check on an assembled window remakes the whole window.

Can we use our own checklist?

Yes. Extrusia starts each part with a list written for a vinyl window plant, and the QC manager edits it line by line, part by part. You also choose how many lines each check prints.

Does the audit have to be done on paper?

Paper is what an auditor can carry to a bench and mark with one hand. The sheet is scanned back in afterwards, the marks are read and shown for a person to confirm, and the scan is kept with the report.

See it on your own products

The best demo is your own catalog.

Send us what you make and what you run today. We'll show you Extrusia quoting your own windows, at your own prices, checked against what your current system says.