- Home
- Integrations
- Zebra
Integration · Zebra label printers
Every label in the plant, printed from the window it goes on.
A window picks up several stickers on its way through a plant: a tracking label at the saw, a welder label, one per sealed unit at glass, a shipping label and an NFRC certificate at QC. Extrusia prints each one from the window's own order to the Zebra at the bench that needs it.
The labels it prints
Tracking labels
One barcode per window, printed at the saw and scanned at every bench after it, so each station knows where the window is.
Welder labels
The barcode a Stürtz welder scans to load its program and size.
Sash and screen labels
Each sash and screen gets its own sticker, naming which window it belongs to.
One label per sealed unit
Glass stickers come one per IG, not one per pane, each saying which unit of the window it is, with grids and paint when the window has them.
Shipping labels
The job name, PO, ship-to and dates, with the same barcode the shipping bench scans.
NFRC certificates
Printed per window at QC from your certified ratings. If no rating covers the window as configured, no certificate prints.
How printing works
- The printer's own language. Labels go to the printer raw, in ZPL for Zebra printers or EPL for older desktop models, chosen per printer.
- Network or USB. A printer on the network is sent its labels directly; one plugged into a PC is reached through Windows, using the Extrusia agent on that PC.
- Printed once, never twice. Each label is handed to one agent and confirmed when it lands. A printer that is off is retried for twenty minutes, and a label that may have printed waits for a person rather than printing again.
- Each bench prints its own rolls. A bench is set up with the labels it prints, so a 4" by 6" certificate never comes out on a 4" by 1" roll.
- Every sticker carries the cart. The cart number the floor uses is on every label, so a sticker found on a rack can be traced back to its cart.
Your own label designs
Extrusia's label designer lays out text, barcodes and lines on your label size. Before a design is saved it is checked for the two mistakes a preview can miss: a field name that does not exist, which would print blank, and anything past the edge of the label, which the printer would cut off. The preview is drawn by the same code that prints, so what you see is what comes out.
Note: Zebra, ZPL and EPL are trademarks of their owner. Extrusia is not affiliated with or endorsed by Zebra Technologies; the names describe the equipment Extrusia exchanges data with.
Zebra label printing — common questions
Which Zebra printers does Extrusia work with?
Printers that take ZPL, which is most Zebra industrial and desktop models, and older desktop models that take EPL.
Do we need special label software?
No. Extrusia draws the labels and sends them to the printer, so no separate label design software is needed.
What happens if the printer is off?
The label waits and is retried over twenty minutes. The Machines screen shows any bench whose labels are waiting.
Can we print a label again?
Yes. A bench can reprint a window's label, and a label that failed can be sent again from the Machines screen.