ETRUSIA
  1. Home
  2. Integrations
  3. Stürtz

Integration · Stürtz welders

The welder scans the label. The label comes from the order.

A Stürtz welder loads its weld program and sets its axes from a barcode the operator scans. Extrusia prints that barcode for every frame, from the same order the saw cut from, so the welder is never set up from a size somebody copied by hand.

What the welder label carries

The barcode the welder reads

The profile code, then the width and height in hundredths of an inch, five digits each, for example 143DH 03550 07650 for a 35.50" by 76.50" frame. The profile code picks the weld program and the sizes drive the positioning axes.

Built from the plant's own labels

The format was decoded from the labels a working plant's welder already scanned every day, and proven at that welder.

Your welder's name for the profile

Where the welder knows a profile by a different name than your catalog does, the series carries the welder's name, and the barcode uses it.

What the operator reads

Beside the barcode: the size to four decimals and the cart number, so a label that ends up on the wrong frame is easy to spot.

Your label roll, your printer

Printed on the roll the welder station already uses, such as 2" by 1" stock, in ZPL for most Zebra printers or EPL for older desktop models.

Printed where it suits the plant

A cart's welder labels can come off the office printer before cutting starts, or off the frame saw's own printer when the cart is opened there.

Nothing changes on the welder

The welder reads the label it already reads. Extrusia sends the welder no files and needs no network connection to it, no change to its software and no order-import option. What changes is where the label comes from: the window's order, not a size typed at a desk.

Why an older label printer matters

Some desktop Zebra printers speak only EPL, and an EPL printer handed ZPL discards it without an error: no paper and no warning light, while Windows reports the job printed. Extrusia prints the same label design in either language, chosen per printer, and lets you set print darkness, because a label too pale to scan stops the welder.

Note: Stürtz and Zebra are trademarks of their respective owners. Extrusia is not affiliated with or endorsed by them; the names describe the equipment Extrusia exchanges data with.

Stürtz welder labels — common questions

Does Extrusia send programs to the Stürtz welder?

No. The welder loads its own program from the profile code in the barcode, as it does today. Extrusia prints the label; the welder does the rest.

Do we need a licence from Stürtz?

Not for the label. The welder scans an ordinary barcode, the same way it scans the labels you print now.

Will it work with our label printer?

Most likely. Extrusia prints ZPL for Zebra printers and EPL for older desktop models, to a network printer or one attached to a PC.

Can we change what else is printed on the label?

The barcode stays as the welder needs it. The text around it can be laid out in Extrusia's label designer.

See it on your own products

The best demo is your own catalog.

Send us what you make and what you run today. We'll show you Extrusia quoting your own windows, at your own prices, checked against what your current system says.